weird watchmaker tools?

[Bamadadof3]

]Ok guys I bought a box full of old watchmaker tools and supplies and these two items I can't figure out what they are. Can you?

cups all.jpg (147.13 KiB) Viewed 5006 times

cups single close.jpg (120.74 KiB) Viewed 5006 times

cup inside.jpg (118.25 KiB) Viewed 5006 times

These are little aluminum (I think) cups that are two pieces that slide into each other. there are 7 total from large to small. They are all quite small with the largest the size of a thimble.

pully closeup.jpg (116.99 KiB) Viewed 5006 times

This picture is a pulley that is very small and I have about 8 of them all small and different sizes. What do these go to?

[Bamadadof3]

More pulley pics.

pully whole.jpg (121.75 KiB) Viewed 5005 times

pully side.jpg (95.77 KiB) Viewed 5005 times

Sorry I didn't size these right before posting I will try and do better next time for you mobile users.


Glenn

[david pierce]

Bama,
The cup like things look like tools to lubricate springs. If you put cotton balls soaked in oil in the cups and pull the spring through the slots it should lubricate your mainspring. The pulleys are good for turning and polishing pivots with a set of turns.
david

[david pierce]

CORRECTION
I should have said PINIONS not PIVOTS.
david

[david pierce]

Bama,
The tools with the pulleys are called TURNING ARBORS.
david