Carriage Clock problem

[Mclark3617]

Ok guys, its been awhile since I have been on here but I ran into an issue with a carriage clock. I'm hoping someone can help me with it.
I have a J.E. Calowell made in France Carriage Clock and the Escape wheel has a broken pivot. I was hoping someone on here could either direct me to were I can get another one or to someone who could repair the one I have, I have already looked on Ebay and tried Timesavers. Thanks for any help

the Escape wheel is 15 tooth, about 7.1mm or .280 in dia and about 12mm long with the broken pivot missing

below are some pics

This is the broken escape

carriage1.jpeg (16.73 KiB) Viewed 8967 times

carriage2.jpeg (32.45 KiB) Viewed 8967 times

carriage3.jpeg (30.55 KiB) Viewed 8967 times

carriage4.jpeg (33.44 KiB) Viewed 8967 times

[DRichards]

Hello Mclark3617
I don’t think you will have much luck finding a replacement but might get lucky.
Bob T used to be the go to guy for me for pivoting
and staff making but that was back in the late 80s and 90s.
I think he stopped taking in outside work long ago but you might give a shoutout just to see.
Another person who has a good reputation for doing very good work is Matt Henning at
https://www.henningwatches.com/
Nice clock by the way!

Hope this helps,
Best Dean

[Mclark3617]

Thank you Sir, I will give those a try.. and yes it is a nice clock.. and I haven't even started cleaning it. Thanks again

[Mclark3617]

quick question on part identification.. can you tell me the name of the wheel that connects to the escapement pinion? its a unique wheel as it connects at a 180 from the pinion..its the wheel the platform escarpment connects directly too

when I was talking to the fellow thats going to help me with the escape wheel pivot he was asking about "the count of the train", I assumed he was talking about the tooth count on that wheel. the concern was that I had the right escape wheel. the one I have has 8 leaves on the pinion and he said we could be sure it was the right escape wheel by the count of the train.

[Retired and Bored]

Hello MCLark
I think you’re talking about the contrate wheel.
Pretty sure.
Good luck with pivoting job.

Howard

[Mclark3617]

Thank you and I know how everyone love pictures so here is a pick of my platform escapement with the broken pivot

image0.jpeg (341.09 KiB) Viewed 8946 times

[Mclark3617]

update...Escapment is with Mark Henning and waiting to hear of the damage..

[Mclark3617]

Does this escape wheel look broke. Or turned down to replace the shaft. And do you think it can still be re pivoted