brocot pallet alignment.
Posted: Fri Oct 23, 2020 2:58 pm
Hello all, I hope you are all well. We're doing ok here in Fl.
This is the first Brocot escapement I've done so I have a few questions. I've watched William's demonstration of the repair method. It looks as though I have some badly adjusted pallets. From what I gathered these pallet flats should be in line with the center of the EW pivot. Is that correct and can I turn them in place? I think they are friction fit.
I could probably get better pics if you want.
I'm going to watch the repair again and I'll check back. Thanks for the help. Danny
This is the first Brocot escapement I've done so I have a few questions. I've watched William's demonstration of the repair method. It looks as though I have some badly adjusted pallets. From what I gathered these pallet flats should be in line with the center of the EW pivot. Is that correct and can I turn them in place? I think they are friction fit.
I could probably get better pics if you want.
I'm going to watch the repair again and I'll check back. Thanks for the help. Danny
- 20201003_131725.jpg (133.57 KiB) Viewed 3274 times
- 20201003_131555.jpg (224.26 KiB) Viewed 3274 times