Newbie here (to clock repair and forum), first time post!
Had a slight accident when hanging a Vienna regulator in our new home. The clock slipped off wall mount but fortunately I was there to catch and keep it from hitting the floor. The only thing damaged was the pendulum suspension spring which broke in two pieces (please see picture below). I do not know how or where to size a new one. The spring appears to be stainless with two strips which are sandwiched between two steel plates. I have attached a picture of the broken spring which I would estimate as 1.0" long. The end that attaches to a bracket mounted to the back of the case is .219" tall X .312" wide X .040" thick with a .040" hole for pin. The other end is .312 X .312 X .040" thick with a .040" pin which the pendulum hangs on. Any advice would be greatly appreciated!...Thanks, Tom
19_05-20 Vienna Regulator Suspendsion Spring.pdf