Bushing trouble
Posted: Sat Mar 30, 2019 7:44 pmHey all,
I have a problem that I hope someone can help me with. While attempting to broach by hand for a new bushing, I accidentally made the hole slightly too large to fit the bushing. I now need a larger OD (3mm) but with a .80mm ID. So far I have not been able to find a brass bushing in the size I need. Also I don’t have a lathe so I’m not able to make my own bushing. I am new to this and would appreciate any help I can get. Thank you. John
I have a problem that I hope someone can help me with. While attempting to broach by hand for a new bushing, I accidentally made the hole slightly too large to fit the bushing. I now need a larger OD (3mm) but with a .80mm ID. So far I have not been able to find a brass bushing in the size I need. Also I don’t have a lathe so I’m not able to make my own bushing. I am new to this and would appreciate any help I can get. Thank you. John